HPMV-DN 10kV Medium Voltage Solid State Soft Starter

The HPMV is a third generation, Medium Voltage, digital Medium voltage motor soft starter, designed for use with standard

Medium voltage solid state soft starter:

The HPMV is a third generation, Medium Voltage, digital Medium voltage motor soft starter, designed foruse with standard asynchronous and synchronous motors. This highly sophisticatedsoft starter ensures smooth, step-less acceleration and deceleration, eliminatingcurrent and mechanical shocks on motor and load. The HPMV may be supplied aschassis type or a complete system including Line and/or Bypass Contactors. Addibleoptions are Load Break Switch, Fuses, Motor Protection Relay, etc.

Advantages at a Glance :

  

Innovative low voltage test mode - full testing with a small L.V motor using standard built in features

Advanced Electronic Potential Transformer utilizing Patent Pending "wireless" fiber-optic firing system

Each starter is tested for Partial Discharge (Korona) ensuring long term reliability

Power factor capacitors can be connected directly to the upstream contactor

Heavy duty design at 50 ambient temperature Reduced inrush current and mechanical shock Third generation microprocessor circuitry Soft, stepless acceleration & deceleration Unique starting & stopping characteristics

Sophisticated motor protection package User friendly, easy setting and operation IP30-standard, higher protection by special order Two optional methods of delivery: Chassis type for self assembly or Complete system RS485 Communication with MODBUS, PROFIBUS protocols (others - upon request)

Wide 45-65Hz Auto-tracking frequency range combining special software with unique hardware arrangement (designed for Marine, Offshore and Generators operating under continuous frequency variation)

Torque and current starting and stopping characteristics.

Pump control software.      Starting & Stopping :  

Soft start and soft stop

Current limit

Torque & Current Control ramps

Pump Control characteristics

Pulse (kick) start

Tacho/encoder feedback (option)

Dual Adjust - 2 start/stop characteristics for varying loads, two speed motors, etc.  Soft starting, Soft Stopping and Final Torque of an HRVS-DN utilizing our infamous "Pump Control Program"       Setting & Supervision:    

Illuminated LCD with 2 lines, 16 characters each

Selectable languages: English, German, French or Spanish

The LCD displays motor current, fault description and statistical data

Easy setting using six soft-touch keys with default parameters

Eight LEDs for a quick status display:

     Control voltage On-Self Test OK

     Motor soft starting

     Motor running

     Motor soft stopping

     Motor stopped

     Test Mode Activated

     Dual Adjust mode

     Fault      Statistics :  

Last Starting Period

Last Start Maximum Current

Total Run Time

Number of Starts

Last Trip

Trip Current

Total Number of Trips

Historical Trip Event Recorder (10 Event conditions) Control Inputs & Outputs:  

Control voltage: 110-120, 220-240VAC / 50-60Hz or 110 - 220VDC to be specified

Separate inputs for Start, Stop (Emergency) and Soft Stop

Two programmable External fault inputs - will stop the motor 2 sec. After the contact closes

Aux. Contacts - three C/O relays, 8A, 250V, 2000VA:          Immediate Relay - changes position upon start signal, with adjustable On & Off delays.          Returns to original position upon Voltage Outage, Fault, Stop signal and Soft stop signal          at the end of soft stopping process. It can also be configured as a "Shear-pin Alarm" contact.          End of Acceleration Relay - operates upon completion of starting process, with adjustable          On delay. Returns to original position upon Voltage outage, Fault, Stop and Soft Stop signals.          Fault Relay - can be programmed as:          Fault - changes position upon Fault, returns to original position upon Reset.          Fault-Fail-Safe - changes position upon control voltage connection, returns upon fault. 

Typical Applications:

  

Fans and centrifuges

Conveyors and monorail systems

Pumps, Compressors and Chillers

Starting large motors from weak power supply(diesel generators, long supply lines, etc.)       

Marine & Offshore Applications :

  

Thrusters

Cargo Pumps (LNG, LPG, etc.)

Water & Ballast pumps

Refrigeration compressors

Hydraulic pumps & power packs

Main Propulsion (Variable Pitch Propellers)

HPMV-DN 10kV Medium Voltage Solid State Soft Starter