Digital Motor Voltage Soft Start

series low voltage soft starter ,intelligent economic soft start,designed for use with three phase induction motors

Digital Motor Voltage Soft Start

The HPS2DB softatrter is a highly sophisticated and reliable starter designed for use with standard three-phase, three-wire, squirrel cage induction motors. It provides the best method of reducing current and torque during motor starting.

The optional RS 485 Communication with MODBUS protocol enables full control (Start, Stop, Dual Adjust, command, etc.) and supervision. Up to 32 starters can be connected

on a shield twisted pair to a host computer.

Starting & Stopping :   Prior to InstallationCheck that Motor's Full Load Ampere is lower than or equal to the starters Full Load Current and that Main and Control voltages are as indicated on the front panel.MountingThe starter must be mounted vertically, allow sufficient space above and below the starter for suitable airflow.It is recommended to mount the starter directly on the rear metal plate for better heat dissipation.Do not mount the starter near heat sources.Protect the starter from dust and corrosive atmospheres.Temp. Range and Heat DissipationThe starter is rated to operate over a temperature range of -10ºC(14ºF) to + 50ºC (122ºF). Relative noncondensed humidity inside the enclosure should not exceed 95%.Starter's heat dissipation is approx. 3 x In (three times the current in watts).Example: For a 100A motor, heat dissipation is approx. 300watts.Internal enclosure heating can be reduced through the use of:a. Additional ventilationb. Employing a by-pass contactor.Short Circuit ProtectionProtect the starter against a short circuit by Thyristor Protection Fuses.  

Control Terminals:  

Terminals 1-2Control supply110-120Vac or 220-240Vac, 50/60HzTerminal 3GroundTerminal 4Start Signal Input:Input form a N.O contact. To start the motor,connect common terminal (Terminal 6) to Terminal 4 for at least 500mSecs.Terminal 5 Soft Start Signal Input:Input form a N.C contact. To soft stop the motor,disconnect common terminal( Terminal 6 ) to Terminal 5 for at least 500mSecs.Terminal 6Common Terminal,Common for terminals 4,5Terminals 7-8Programmable Signal Relay,Programmable function:Run Relay(Normal Open):Changes its position when starter running(Start/Soft Stop process or Motor running).Over Current Fault Relay(Normal Close):Changes its position on Over Current Fault.Terminals 9-10By-pass relay, changes its position at the end of AccelerationTerminals 11-12Programmable Fault Relay,changes its position on fault, the contact is programmable to function as Normal Open or Normal Close relayOption Module

3) Field Bus Communication Connector:Modbus protocolCode AStandard RS485,Half duplex with Modbus protocol,baud rate 1200,2400,4800,9600 BPSProfibus protocol (Code B)DeviceNet protocol (Code C)RS232C (Code D)Starter control program on-line update

4) Analogue Signal Ouput: Analogue value is related to motor cuurent and operation supplyvoltage. 

Digital Motor Voltage Soft Start

Verified Information This information is Verified by Bureau Veritas and validity period is 2012/05/21 --- 2013/05/21 All the information below may covers both Gold Supplier and its related companies , Their Relationship will be affirmed according to china laws and regulations , also it will be clearly display in the full report >> Production Capacity: Product line name Production Line Capacity Actual Units Produced(Previous Year)

Soft Starter, Vector Inverter, Permanent Magnetic Vacuum Circuit Breaker, Permanent Magnetic Vacuum Contactor	7980 Units per Year	4030 Units

Export Market Distribution: Market Revenue(Previous Year) Total Revenue (%)

South America	USD 142,207	0.6
Eastern Europe	USD 2,730,314	10.5
Southeast Asia	USD 13,140	0.05
Africa	USD 1,076,228	4.1
Oceania	USD 53,368	0.2
Mid East	USD 568,250	2.2
Eastern Asia	USD 27,324	0.11
Central America	USD 41,597	0.16
Northern Europe	USD 63,583	0.25
Southern Europe	USD 45,358	0.18
South Asia	USD 25,850	0.1
Domestic Market	USD 21,050,992	81.55

Production Machinery: Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition

Bus Bar Machine	Shandong Gaoji, BN303-S-3-8P	1	3.0	Acceptable
Bus Bar Machine	DMX-303-SB	1	5.0	Acceptable
Bus Bar Bending Machine	Suzhou Tongli, SL-II	1	5.0	Acceptable

Testing Machinery: Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition

Oscilloscope	Agilent Technologies & DSO 7054A	1	4.5	Acceptable
High Voltage Test Machine	XCJH	1	5.0	Acceptable
DC Power	Shanghai Huayi, HY3020	1	3.0	Acceptable
DC Power	Shanghai Huayi, HY3003D-2	1	3.0	Acceptable
Soft Starter Test Board	Solcom & HAPN, HP-1	10	3.0	Acceptable
Low-Voltage Inverter Operation Box	HAPN, OB-HPVFV	4	2.0	Acceptable
Power Frequency Withstand Voltage Tester	Nanjing Changsheng, CS2674A	1	8.0	Acceptable
RLC Digital Bridge	TH2811C, TH2817B	2	4.0	Acceptable
Magnetic Element Selector	Hangzhou Yuanfang, CF-3A	1	3.0	Acceptable
Permanent Vacuum Contactor Test Control Board	N/A	1	1.0	Acceptable

Production Flow: 1.Raw Material 2.Inspection on Raw Material 3.Material Distributing 4.Assembly 5.Electrical Performance Test 6.High-pressure Test 7.Aging Test 8.Packing Process 9.Final Product Certification: Certified Picture Certification Name Certified By Certificate No. Product Name & Model No. Available Date-Expired Date

	Certificate for China Compulsory Product Certification	China Quality Certification Centre	2010010304400493	Soft Starter, HPS2D-75, HPS2D-90, HPS20-110, HPS20-145; Ith: 75A, 90A, 110A, 145A; Ue: AC400V; Ie:75A, 90A, 110A, 145A; Type: AC-53a; Pole No.:3P	2010/05/27 --- 2014/09/30
	Certificate for China Compulsory Product Certification	China Quality Certification Centre	2010010304400494	Soft Starter, HPS2D-175, HPS2D-210, HPS20-250; Ith: 175A, 210A, 250A; Ue: AC400V; Ie:175A, 210A, 250A; Type: AC-53a; Pole No.:3P	2010/04/23 --- 2014/09/30
	Certificate for China Compulsory Product Certification	China Quality Certification Centre	2010010304400489	Soft Starter, HPS2DN-175, HPS2DN-210, HPS2DN-250; Ith: 175A, 210A, 250A; Ue: AC400V; Ie:175A, 210A, 250A; Type: AC-53a; Pole No.:3P	2010/04/08 --- 2014/09/30
	Certificate for China Compulsory Product Certification	China Quality Certification Centre	2010010304400496	Soft Starter, HPS2DN-18, HPS2DN-30, HPS2DN-40, HPS2DN-60, HPS2DN-75, HPS2DN-90, HPS2DN-110, HPS2DN-145; Ith: 18A, 30A, 45A, 60A, 75A, 90A, 110A, 145A; Ue: AC400V; Ie: 18A, 30A, 45A, 60A, 75A, 90A, 110A, 145A; Type: AC-53a; Pole No.:3P	2010/04/08 --- 2014/09/30
	Certificate for China Compulsory Product Certification	China Quality Certification Centre	2010010304400490	Soft Starter, HPS2DN-300, HPS2DN-370, HPS2DN-470, HPS2DN-570, HPS2DN-720, HPS2DN-840; Ith: 300A, 370A, 470A, 570A, 720A, 840A; Ue: AC400V; Ie: 300A, 370A, 470A, 570A, 720A, 840A; Type: AC-53a; Pole No.:3P	2010/04/08 --- 2014/09/30
	Certificate for China Compulsory Product Certification	China Quality Certification Centre	2010010304400495	Soft Starter, HPS2D-300, HPS2D-370, HPS2D-470, HPS2D-570, HPS2D-720, HPS2D-840; Ith: 300A, 370A, 470A, 570A, 720A, 840A; Ue: AC400V; Ie: 300A, 370A, 470A, 570A, 720A, 840A; Type: AC-53a; Pole No.:3P	2010/04/08 --- 2014/09/30
	CE Certification of Conformity	Belcome Technology Service	bel-cn-071015-31	Inverter, HPI 5000(0.75KW-350KW)	2007/10/18 --- 2049/12/31

Testing Report: Report Picture Report Name Report By Product Name & Model No. Report Date

	CCC Test Report	Shanghai Institute of Electric Equipment inspection	Soft Starter, HPS2D-300, HPS2DN-370, HPS2DN-470, HPS2DN-570, HPS2DN-720, HPS2DN-840	2009/11/23
	CCC Test Report	Shanghai Institute of Electric Equipment inspection	Soft Starter, HPS2DN-18, HPS2DN-30, HPS2DN-45, HPS2DN-60, HPS2DN-75, HPS2DN-90, HPS2DN-110, HPS2DN-145	2009/11/23
	CCC Test Report	Shanghai Institute of Electric Equipment inspection	Soft Starter, HPS2DN-175, HPS2DN-210, HPS2DN-250,	2009/11/23
	CCC Test Report	Shanghai Institute of Electric Equipment inspection	Soft Starter, HPS2DN-300, HPS2DN-370, HPS2DN-470, HPS2DN-570, HPS2DN-720, HPS2DN-840.	2009/11/23
	CCC Test Report	Shanghai Institute of Electric Equipment inspection	Soft Starter, HPS2D-175, HPS2D-210, HPS2D-250	2009/11/23